HEALTHCARE SKIN PRESSURE DETECTOR

Abstract

When you apply pressure to an artery, the artery is pushed against bone, which stops the bleeding. Firmly press on the artery that runs between the bleeding location and the heart. Apply strong pressure immediately to the bleeding site if there is severe bleeding. for more than 5 minutes to an artery When you apply pressure to an artery, the artery is pushed against bone, which stops the bleeding. Firmly press on the artery that runs between the bleeding location and the heart. Apply strong pressure immediately to the bleeding site if there is severe bleeding. for more than 5 minutes to an artery. Healthcare Skin Pressure Detector can measure amount of pressure applied to a site. With using Force Sensitive Resistor (FSR) and placed under fake skin/skin. And able to estimate the pounds of pressure applied. The sensor also can only detect pressure to approximately 20 lbs which isn’t high enough when detecting pressure applied for artery bleeding stoppage. And this project concept to testing showcase how Arduino boards can create new healthcare simulation. Now days, people easy to get a minor bleeding at home or work place. In this way, people need to go to pharmacies or some clinic near they to stop the bleeding. So this device can stop the minor bleeding with 20lbs and not to high enough when detect pressure from the bleeding.